C-TOP+ with AS-interface15/05/2014
We inform you that the C-TOP+ AS-i control units are now available.
The C-TOP+ control unit with AS-i (Actuator Sensor Interface) communication is designed for the optimal automation of INOXPA process valves.
The control is unit available for the entire range of valves supplied with C-TOP+ units (ball valve, butterfly valve, single and double seat multiway valve, etc.).
Depending on the version, the head can have up to three solenoid valves 3/2 (NC) and three sensors. The sensors are magnetoresistive, with contactless activation.
The C-TOP+ AS-i also incorporates three signalling LEDs which continuously indicate the status of the valve, and one flashing red LED to alert in case of signal loss.
The standard version complies with V3.0 specifications (62 slave addresses), control units that comply with V2.0 specifications (31 slave addresses) can be manufactured upon request.