MILK RECEPTION EQUIPMENT

Application

Milk reception equipment for dairies or milk processing plants. This equipment discharges the milk, deaerates it and measures the total volume transferred to the next stage of the process.

Operating principle

Milk, especially at low temperatures, absorbs a considerable quantity of air in the form of bubbles (up to 4%). The milk arrives to the processing plant already  filtered, then it is tangentially introduced to a small tank. At this stage the milk is deaerated. And a centrifugal pump transfers milk to the next stage.

Design and features

It is a hygienic compact skided-mounted system.
Milk is transferred from the milk tanker to a tank of 100 litres. The tank is provided with a deaerating valve and  minimum/maximum level sensors.
A centrifugal pump transfers milk from the tank to the next stage passing it through a Y filter and a electromagnetic flowmeter.
The control panel assembled on the same skid frame controls the centrifugal pump, flowmeter and minimum/maximum level sensors.
Three models are available for various flow parameters.
The unit is designed for CIP cleaning.

Materials

Metal parts in contact with the product          AISI-316 L
Ohter metal parts and control panel                 AISI-304
Tank and pipes external surface finish             sand blasted
Tank and pipes internal surface finsh               mat polished
Gaskets in  contact with the product              EPDM (FDA)
Pump mechanical seal                                         C/StSt/EPDM
Deaerating valve  in  AISI 316L with a natural rubber ball

Options

Valves wihtout C-TOP,
actuator and solenoid valve switches in the control panel.
Non-automated manual valves.
Connections: DIN, SMS, RJT…
Centrifugal pump frequency converter in the control panel.
Operador interface.
Various sizes of screens for the filter.
Analogic level control.

Data sheet

ESENFRITDERUPL