JET MIX MIXER

Application

JET MIX mixers are used in case a simple mixing with an ordinary agitator is not enough but a high shear dispersion violates the product nature. Mixers of JetMix series are widely used in the food processing, cosmetics, pharmaceutical and fine chemicals industries.
It can be used either in open or in closed tanks at the atmospheric pressure, under pressure or vacuum, and with the products of low or medium viscosity.

Operating principle

A three blade rotor rotates at a high speed inside the static head. The driving shaft is situated insude the pipe and guided by the bearings at its lower part just over the working head.
The major part of the flow from the JET MIX head is directed from the product surface to the bottom of the tank, but a part of the flow is radially deviated and partially sheared.
Thus a fast mixing, dissolution or dispersion of the product is achieved.
In some cases the installment of deflectors is not necessary.

Design and features

High power of flow and turbulence.
Sanitary mechanical seal.
Jet-Mix head (standard).
Possibility to change the head, rotor and mechanical seal wihtout dissabling the unit.
Variuos easily interchangeable working head models.
IEC B5, IP55 motors, F-class insulation.

Materials

Parts in contact with the product   AISI-316
Mechanical seal                                  SiC/SiC/EPDM
Gaskets                                               EPDM

Options

DIN2632 PN-10 flange for the assembly on a tank.
Other mechanical seal materials.
GAskets: FPM or PTFE.
Mixer type working head.
Saw tooth propeller.
Mechanical seal leak detectors.
Motors with various protections.

Data sheet	ESENFRITDERUPL
Instructions manual	ESENFRITDERUPL