BMI VERTICAL AGITATOR

Appication

This is a range of vertical direct motor-driven agitators. They can be used in processes of mixing, dissolution, dispersion, and maintenance whenever strong, high-speed stirring is required in the food-processing, cosmetics, pharmaceutical or chemical industries.
They can be fitted to tanks of up to 5000 liters, typically with low-viscosity products. 
 
Operating principle 

These agitators can be installed inside the tank either centrally with current deflectors, or offset so that the offsetting itself prevents the rotation of the stirred material.
The operating principle depends on the type of propeller used.

Design and features

Vertical agitators.
Packing by retainer.
Bearings support.
Propeller attached to shaft and shaft attached to half-shaft by Allen setbolts.
Standard electropolished surface finishing.
IEC B5 motors, 1500 rpm, IP 55, F-class insulation.
Max. power 5.5 kW.
Marine propeller.

Materials

Parts in contact with the media         AISI-316L
Retainer                                                NBR
Bearing support                                   Aluminum

Options

Serrated turbine.
Sealing through double/cooled mechanical seal.
Retainer in FPM.
One-piece shaft.
Welded propeller and Ra<0.4 surface finishing.
Engine shroud.
Engines with additional protection.
950 rpm and 750 rpm engines.
Gearbox drive or speed-selector drive.
Shafts lined with plastic material for use with corrosive materials.

Instructions manual

ESENFRITDERUPL