MS MULTISTAGE CENTRIFUGAL PUMP

Applications

The MS pump is a multi-impeller centrifugal pump. This type of pumps is used for pumping fluids at low output and high pressure, thereby achieving a much higher performance than single-stage centrifugal pumps. Their applications include processes in the dairies and beverage industries, such as filter feeding, filling systems and feeding of exchangers. They can also be used to pump drinking or process water, CIP cleaning systems, and in the textile industry.

Operating principles

The MS pump consists of an inlet body and outlet body, and between the inlet and the outlet one to six successive stages can be added.Each stage consists of a casing and an impeller.
The first impeller receives the pumped material from the inlet area of the pump, and every next impeller receives the material from the preceding impeller, until the last impeller drives the product through the outlet of the pump.
Each stage impels to the fluid an amount of pressure according to the power of the impeller, and the differential pressure of the pump is the sum of the pressure added by each of the successive stages.

Design and features

Close-coupled pump without shroud.
Cold-formed bodies and covers.
DIN connections (standard).
Cold-formed close impellers.
Motor approved according to IEC. B34 constructive design.
Single internal mechanical seal  according to DIN 24960 L1K.

Materials

Parts in contact with pumped med              AISI 316L
Lantern and bearing support                       GG-22
Gaskets (standard)                                       EPDM (FDA)
Mechanical seal (standard)                           SiC/SiC/EPDM

Options

Motor shroud and base plate in AISI 304L.
Mechanical seal in SiC/C.
Gaskets in FPM (Vitón ) and/or NBR.
Motors with additional protection.
Trolley with switchboard.
.

Catalogue	ESENFRITDERUPL
Data sheet	ESENFRITDERUPL
Instructions manual	ESENFRITDERUPL
CAD 3D	8112-300.multiturbin... 8104-300.multiturbin...