INOXPA S.A.U.
C/ Telers, 60
17820 Banyoles, Spain
Tel. +34 972 57 52 00
Fax +34 972 57 55 02
inoxpa@inoxpa.com
News
New Prolac HCP
INOXPA announces the launch of the new range of centrifugal pumps PROLAC HCP.
The new PROLAC HCP is a close-coupled centrifugal pump designed to meet the highest hygienic requirements of the food-processing, dairy and pharmaceutical industries. The range consists of 12 models with the flow rate up to 180 m3/h and head up to 95 m (50 Hz).
Main features:
• New hydraulic system, enhanced to ensure an efficient and silent performance with low NPSHr.
• Stainless steel pump with matt external surface finish and polished internal finish (Ra <0,8).
• EHEDG certified pump: easily cleaned internal parts, no difficult-to-clean components and flush gaskets ensure an effective CIP/SIP.
• Hygienic design pipe legs with O-rings.
• Enhanced clamp connection of the shaft to the motor shaft.
• Motor IEC B35 (legs and flange) for all of the pumps. The PROLAC HCP pump will gradually replace the current PROLAC S pump.
Other news
-
31/03/2020
COVID-19 update
Given the current situation in Spain amid the coronavirus outbreak, we would like to inform you that INOXPA is considered a provider of essential services
-
10/12/2019
LR/LM side entry agitator
LR/LM side entry agitator range is designed for use in low viscosity product mixing and maintenance applications
-
27/11/2019
Pilot plant session: CIP systems
INOXPA Headquarters hosted a training and demo session of the CIP cleaning and product recovery systems held at the pilot plant
-
21/11/2019
Visit to the factory
Students from the University of Girona visited INOXPA Headquarters in Banyoles
-
24/10/2019
Case studies
To share our experiences, we added a special section of Case studies to the website
-
03/10/2019
Video clip: production of solutions at INOXPA
A new video clip has been released: production of Solutions at INOXPA
-
09/09/2019
PIGGING SYSTEM - Highest hygiene and efficiency
The INOXPA PIGGING SYSTEM recovers products that remain in the pipework after each production run, enabling the recovery of up to 98% of leftover product
-
18/07/2019
Agitators: food grade oil
All geared motors of INOXPA agitators use H1 (incidental food contact) food grade oil registered by NSF
-
13/06/2019
Pilot plant session: mixing of solids
On June 11-12, INOXPA hosted a training session on mixing of solids.
-
06/06/2019
Maintenance videos: SLR rotary lobe pump
INOXPA presents the new series of maintenance videos on the SLR rotary lobe pump
-
29/05/2019
Erich Gonçalves, INOXPA project leader in Brazil
On the 15th of May, Erich Gonçalves joined our company as local project leader for Brazil
-
04/04/2019
3-A certified INNOVA seat valves
3-A certificate has been awarded to INNOVA N and INNOVA K seat valves, designed for use in the main processes in the food, dairy, beverage, and pharmaceutical industries
-
21/02/2019
Technical training
On February 19-20, INOXPA headquarters hosted a technical training course for distributors arranged by the international sales department
-
18/12/2018
INOXPA, a consolidated brand in constant evolution
INOXPA’s marketing and communication department works toward the objective of maintaining a coherent image representative of a company in continuous growth
-
14/12/2018
INOXPA announces the acquisition of FLUINOX
INOXPA announces the acquisition of 100% of the Spanish company FLUINOX, headquartered in Valencia
-
08/10/2018
Training for distributors - October 2018
On October 2-4, INOXPA headquarters hosted a training course for the distributors
-
25/09/2018
Trade fairs in 2018
We participate in the most important trade fairs of the industry, where we present our innovations
-
06/08/2018
INOXPA introduces the new BMA magnetic agitator range
INOXPA’s new BMA magnetic agitator range is an innovative and highly hygienic solution
-
18/06/2018
The best are the genuine
INOXPA genuine spare parts are subject to strict quality control, that guarantees the correct performance of all INOXPA products
-
08/06/2018
Pump specialist seminar
INOXPA headquarters hosted an advanced level training course for distributors
-
16/05/2018
Service and maintenance videos
INOXPA is developing a new type of videos: service and maintenance
-
11/05/2018
Virtual tour 360º
360º tour allows you to virtually visit the Pilot plant and other INOXPA head office facilities
-
22/02/2018
Training for distributors
Training courses for distributors form part of INOXPA’s ongoing personalised customer care and assistance program
-
15/02/2018
PROLAC HCP and SLR pumps obtained the 3-A sanitary certificate
PROLAC HCP and SLR pumps obtained the 3-A sanitary certificate
-
01/12/2017
Pilot plant session: sauces
A demo session oriented to manufacturers of sauces was held at the pilot plant
-
07/08/2017
New logistics centre in Russia
STARINOX has recently finished the construction of its logistic centre on the outskirts of Moscow
-
21/07/2017
New INOXPA website goes live
The new INOXPA Group website has gone live with updated graphics and contents
-
27/06/2017
Pilot plant session
A demo session oriented to manufacturers of gels, shampoos and detergents was held at the pilot plant
-
30/05/2017
INNOVA, the new valve family
Discover the new family of pneumatically actuated single and double seat valves for hygienic applications
-
29/03/2017
Pumps with new surface finish
INOXPA announces the launch of the pumps with the new matt finish
-
07/02/2017
INOXPA enters the INTERPUMP GROUP
INOXPA is now part of the Interpump Group
-
09/01/2017
IE3 motors
The third stage of Regulation (EC) nº 640/2009 with regard to ecodesign requirements comes into effect
-
07/12/2016
INOXPA Solutions Srl Moldova
The objective is to have an engineering company capable of developing projects and solutions for the countries of
-
28/11/2016
Damià López, new General Manager
The Board of Directors of INOXPA GROUP wishes to inform you that Mr. Damià López has been appointed General Manager
-
22/11/2016
Sales meeting 2016
INOXPA Headquarters in Banyoles hosted the Sales Meeting 2016
-
25/05/2016
INOXPA community
The idea is to keep on sharing with you our projects and activities via the social media channels
-
12/05/2016
New INOXPA pilot plant is open for trials
The Pilot plant is open for production trials and our customers are invited to carry out all the necessary tests
-
29/04/2016
Thank you
Thank you all for the support we have received
-
21/03/2016
Animation: rotary lobe pumps
The new animation is on the range of the rotary lobe pumps: SLR, SLR-T, HLR and TLS
-
17/02/2016
DIN unions and fittings
INOXPA production processes are subject to the highest requirements
-
19/01/2016
Manifold of valves
This new INOXPA video shows how a cluster of seat valves works
-
12/01/2016
OPTIBLANC 2015
Consortium Project with the technological centre VITEC and the GRAMONA and CASTELO DE MEDINA wineries
-
28/09/2015
Catalogue of dimensions
The new catalogue of dimensions is now available
-
31/08/2015
Stainless steel multiposition handle
New stainless steel multiposition handle for butterfly valves
-
17/06/2015
Side channel pump ASPIR
Upgrade of the design of the self-priming side channel pump ASPIR
-
28/11/2014
CEPYME awards
INOXPA is named “SME OF THE YEAR” by CEPYME
-
17/11/2014
Dairy solutions at your fingertips
INOXPA offers its modular system that enables the development of plants with modular skids
-
30/10/2014
High performance centrifugal pump
It is the ideal solution for transferring liquids with high concentrations of suspended solids
-
15/10/2014
Sales meeting
INOXPA is hosting a Sales Meeting this week
-
02/10/2014
Yoghurt production
INOXPA created a video of the yogurt production process
-
19/09/2014
ENTHALPY
The European project aims to reduce energy consumed for the production of powdered milk by 60%
-
24/07/2014
New blender
INOXPA has designed a blender with a counter rotating agitator MCR
-
18/06/2014
Award for Innovation and Design
INOXPA receives "2013 National Award for Innovation and Design"
-
15/05/2014
C-TOP+ with AS-interface
The control unit is available for the entire range of valves supplied with C-TOP+ units
-
23/04/2014
ESTAMPINOX EFI: design upgrades
Upgraded design of the Estampinox EFI centrifugal pump
-
03/02/2014
Improved Solutions Portugal
The production plant is equipped with modern machinery
-
04/12/2013
Downloads
We have redesigned a very important section of the website: downloads
-
28/11/2013
New business opportunities
Inoxrus has achieved a good penetration of the INOXPA brand
-
19/11/2013
PROLAC HCP-WFI
Centrifugal pumps for pharmaceutical applications
-
21/10/2013
New PROLAC HCP SP
INOXPA announces the launch of the new range of centrifugal pumps
-
25/06/2013
Seminar in Germany
INOXPA took part in a technical seminar in Germany
-
05/06/2013
News sales office in Colombia
INOXPA COLOMBIA SAS is a young team of 12 professionals
-
20/05/2013
New sales office in the UAE
NOXPA Middle East will cover the Middle East countries
-
16/01/2013
Demonstration of skids
INOXPA and Parcitank SA arranged a technical workshop
-
25/10/2012
Blenders for solids
NOXPA has designed two blenders for solids: double cone blender and “V”-type blender
