The C-TOP is a pneumatic control unit designed to ensure an optimum control over the INOXPA process valves. It is compatible with most PLC (Programmable Logic Controllers) automated systems with digital communication or bus (AS-interface).
C-TOP can be installed to any current process valve in the food-processing, beverage and biopharmaceutical industries.
INOXPA S.A.U.
Telers, 60
17820 Banyoles, Spain
Tel. +34 972 57 52 00
Fax +34 972 57 55 02
inoxpa@inoxpa.com
C-TOP Control Unit C-TOP
C-TOP Control Unit C-TOP
Request information
C-TOP Control Unit C-TOP
Request information
C-TOP Control Unit C-TOP
Operating principle
The C-TOP control unit incorporates indication and command devices to monitor all types of (piston) process valves.
This unit as a single piece has the following features:
. Pneumatic and electric control over the valve
. Position detectors with feedback
. Possibility of bus communication (AS-interface)
The control units are fitted to the pneumatic actuator. It receives signals from a control panel or from a PLC to actuate the valves and sends signals to the PLC or to the control panel to communicate the status/position of the valve.
Design and features
The design of the C-Top unit is simple, modular and resistant that guarantees the maximum flexibility. The C-TOP units can be set up according to the customer’s requirements.
Configuration of solenoid valves
. Single-acting actuatuion - 1 solenoid valve
. Double-acting actuatuion - 2 solenoid valves
. Mixproof valve – 3 solenoid valves
Configuration of detectors
The valve position is detected by means of microswitches or inductive detectors.
. 1 position (closed or open valve) - 1 detector
. 2 positions (closed and open valve) - 2 detectors
. 3 positions (open valve, closed valve, Mixproof seat cleaning) - 3 detectors
Materials
Base: PPO + GF
Cover :Transparent PC (standard)
Transparent PSU (optional, for work under extreme conditions)
Gaskets: EPDM (standard)
Options
External detector (Detection of the seat lift when it cannot be detected inside the C-TOP).
Materials for work under extreme conditions (PSU cover).
Solenoid valves 24, 110, 220 VAC.
Communication: AS-interface.
Documents
Data sheet (6)
Instruction manual (4)
Operating principle
The C-TOP control unit incorporates indication and command devices to monitor all types of (piston) process valves.
This unit as a single piece has the following features:
. Pneumatic and electric control over the valve
. Position detectors with feedback
. Possibility of bus communication (AS-interface)
The control units are fitted to the pneumatic actuator. It receives signals from a control panel or from a PLC to actuate the valves and sends signals to the PLC or to the control panel to communicate the status/position of the valve.
Materials and Options
Base: PPO + GF
Cover :Transparent PC (standard)
Transparent PSU (optional, for work under extreme conditions)
Gaskets: EPDM (standard)
External detector (Detection of the seat lift when it cannot be detected inside the C-TOP).
Materials for work under extreme conditions (PSU cover).
Solenoid valves 24, 110, 220 VAC.
Communication: AS-interface.
Documents
| Document № | FT.C-TOP.2_ES |
| Title | Cabezal de Control C-TOP |
| File type | |
| Summary | El C-TOP es un cabezal de control neumático diseñado para asegurar un control óptimo de las válvulas de proceso de INOXPA. |
|
|
| Document № | FT.C-TOP.2_EN |
| Title | Control Unit C-TOP |
| File type | |
| Summary | The C-TOP is a pneumatic control unit designed to ensure an optimum control over the INOXPA process valves. |
|
|
| Document № | FT.C-TOP.2_FR |
| Title | Boîtier de Contrôle C-TOP |
| File type | |
| Summary | La C-TOP est une tête de commande pneumatique conçue pour assurer un contrôle optimal des vannes INOXPA. |
|
|
| Document № | FT.C-TOP.2_IT |
| Title | Testata di Controllo C-TOP |
| File type | |
| Summary | Il C-TOP è una testata di controllo pneumatico progettata per assicurare un ottimo controllo delle valvole di processo INOXPA |
|
|
| Document № | FT.C-TOP.2_RU |
| Title | Контрольное Устройство C-TOP |
| File type | |
| Summary | C-TOP представляет собой контрольное устройство, предназначенное для обеспечения оптимального контроля за клапанами INOXPA. |
|
|
| Document № | FT.C-TOP.2_CN |
| Title | 反馈控制单元 C-TOP |
| File type | |
| Summary | C-TOP是气动控制单元，以保证对INOXPA所有工艺阀门的最佳控制。 它可与 PLC系统通过数据通讯或总线 （AS-interface） 系统进行兼容，C-TOP 可安装在所有现场的阀门上，适用于食品饮料、乳品、啤酒及生物制药等领 域。 |
|
|
| Document № | 10.420.30.00ES_RevB |
| Title | INSTRUCCIONES DE INSTALACIÓN, SERVICIO Y MANTENIMIENTO Cabezal de control C-TOP |
| File type | |
| Summary | El C-TOP es un cabezal de control neumático diseñado para asegurar un control óptimo de las válvulas de proceso de INOXPA. |
|
|
| Document № | 10.420.30.00EN_RevB |
| Title | INSTALLATION, SERVICE AND MAINTENANCE INSTRUCTIONS C-TOP control head |
| File type | |
| Summary | The C-TOP is a pneumatic control head designed to assure the optimum control of INOXPA process valves. |
|
|
| Document № | 10.420.30.00FR_RevB |
| Title | INSTRUCTIONS D'INSTALLATION, SERVICE ET ENTRETIEN Tête de commande C-TOP |
| File type | |
| Summary | La C-TOP est une tête de commande pneumatique conçue pour assurer un contrôle optimum des robinets de INOXPA. |
|
|
| Document № | 10.420.30.00IT_RevB |
| Title | ISTRUZIONI DI INSTALLAZIONE, SERVIZIO E MANUTENZIONE Testata di controllo C-TOP |
| File type | |
| Summary | C-TOP è una testata di controllo pneumatica progettata per garantire un controllo ottimale delle valvole di processo di INOXPA. |
|
|
