الأتصال

Telers, 60

17820 Banyoles, Spain

The range of the BCI agitators presents vertical direct motor-driven agitators. These agitators are used in the processes of mixing, dissolution, dispersion and maintenance whenever powerful and high-speed agitation is required in the food processing, cosmetics, pharmaceutical or chemical industries.
 
The agitators are normally fitted to small volume tanks of up to 1.500 liters for work with low-viscosity products.

طلب معلومات

BCI مقلب رأسى

مبادئ التشغيل

The agitators are normally installed inside the tank either centrally with current deflectors, or offset, so that the offsetting itself prevents the rotation of the stirred product.
The rotation of the propeller makes the fluid flow to the bottom and then up to the surface of the product along the walls of the tank. The effect is promoted if the bottom of the tank is curved.
The Lineflux vigorously agitates the content of the tank promoting the mixing of the product  while the saw tooth propeller promotes its dispersion.

التصميمو المميزات

Vertical agitator.
Sealing: V-ring and retainer.
Bearing support.
Propeller attached to shaft and shaft attached to the half-shaft by Allen studbolts.
IEC B14 motor, 1500 rpm, IP 55, F-class insulation.
Max. power 0.75 kW. 
Lineflux propeller (Type 18).

مواد

Parts in contact with the product: AISI 316L
V-ring and retainer: NBR
Bearing support: Aluminum
Surface finish  Ra ≤ 0,8 μm (except Lineflux propeller)

اختيارات

V-ring and retainer: FPM.
Saw tooth propeller. Welded propeller with Ra ≤ 0,5 µm surface finish.
Motor shroud.
Motors with other protections.
Motors: 950 rpm or 750 rpm.
Pneumatic drive.

الوثائق

مبادئ التشغيل
The agitators are normally installed inside the tank either centrally with current deflectors, or offset, so that the offsetting itself prevents the rotation of the stirred product.
The rotation of the propeller makes the fluid flow to the bottom and then up to the surface of the product along the walls of the tank. The effect is promoted if the bottom of the tank is curved.
The Lineflux vigorously agitates the content of the tank promoting the mixing of the product  while the saw tooth propeller promotes its dispersion.
المواد والخيارات

Parts in contact with the product: AISI 316L
V-ring and retainer: NBR
Bearing support: Aluminum
Surface finish  Ra ≤ 0,8 μm (except Lineflux propeller)

V-ring and retainer: FPM.
Saw tooth propeller. Welded propeller with Ra ≤ 0,5 µm surface finish.
Motor shroud.
Motors with other protections.
Motors: 950 rpm or 750 rpm.
Pneumatic drive.

Español - 26‏‏/11‏‏/2025
Document № FT.BCI.3_ES.pdf
Title Agitador Vertical BCI
File type233.26 KB
    تنزيل
English - 26‏‏/11‏‏/2025
Document № FT.BCI.3_EN.pdf
Title Vertical Agitator BCI
File type207.51 KB
    تنزيل
Français - 26‏‏/11‏‏/2025
Document № FT.BCI.3_FR.pdf
Title Agitateur Vertical BCI
File type212.20 KB
    تنزيل
Deutsch - 26‏‏/11‏‏/2025
Document № FT.BCI.3_DE.pdf
Title Vertikalrührwerk BCI
File type209.84 KB
    تنزيل
Italiano - 26‏‏/11‏‏/2025
Document № FT.BCI.3_IT.pdf
Title Agitatore Verticale BCI
File type212.92 KB
    تنزيل
Dansk - 26‏‏/11‏‏/2025
Document № FT.BCI.3_DA.pdf
Title Topmonteret Røreværk BCI
File type212.76 KB
    تنزيل
Русский - 26‏‏/11‏‏/2025
Document № FT.BCI.3_RU.pdf
Title Вертикальная Мешалка BCI
File type333.25 KB
    تنزيل
汉语 - 26‏‏/11‏‏/2025
Document № FT.BCI.3_CN.pdf
Title 垂直搅拌器
File type255.04 KB
    تنزيل
Español - 26‏‏/11‏‏/2025
Document № 20.005.30.01ES.pdf
Title INSTRUCCIONES DE INSTALACIÓN, SERVICIO Y MANTENIMIENTO AGITADOR VERTICAL BCI
File type1.09 MB
    تنزيل
English - 26‏‏/11‏‏/2025
Document № 20.005.30.01EN.pdf
Title INSTALLATION, SERVICE AND MAINTENANCE INSTRUCTIONS VERTICAL AGITATOR BCI
File type985.48 KB
    تنزيل
Français - 26‏‏/11‏‏/2025
Document № 20.005.30.01FR.pdf
Title INSTRUCTIONS D’INSTALLATION, DE SERVICE ET ENTRETIEN AGITATEUR VERTICAL BCI
File type1.04 MB
    تنزيل