RFN مضخة ذات ريشة الدفاعة المرنة

The RFN pump is a flexible impeller pump. It is designed to be reversible and self-priming, able to draw liquid to a maximum height of 5 metres. This type of pump can pump products with a low or high viscosity as well as products that contain particles or gases.

The main applications include pumping dairy products, oil, wine and beverages in general.

طلب معلومات

لقد قرأت سياسة الخصوصية وأوافق عليها أوافق على تلقي المعلومات الترويجية

مبادئ التشغيل

The eccentric shape of the pump casing creates a vacuum in the suction zone as the volume between the paddles increases, sucking in the product.
As the impeller rotates, the product is transported from the suction port to the discharge port and, again due to the eccentric shape of the body, the paddles are bent in the discharge zone, decreasing the volume between them and forcing the discharge of the product.

التصميمو المميزات

Reversible and self-priming
Machined investment-cast body
Impeller drive with double plane on shaft
Single exterior mechanical seal
Easy to maintain
NEMA motor

مواد

Parts in contact with the product 1.4404 (AISI 316L)
Other steel parts 1.4301 (AISI 304)
Lantern ring and bearing support CF8
Impeller CR (neoprene)
Gaskets in contact with the product FPM (standard) - EPDM

Mechanical seal
Rotating part Carbon (C)
Stationary part Silicon carbide (SiC)
Gaskets FPM

Surface finish
Internal Polished Ra ≤ 0.8 μm
External Matte

Connections
CLAMP