Kontakt os

Telers, 60

17820 Banyoles, Spain

+34 972 57 52 00

inoxpa@inoxpa.com

PBC Flytbar omrører

  • Flytbar omrører PBC
  • Flytbar omrører PBC
  • Flytbar omrører PBC
The PBC series agitators are vertical direct motor-driven agitators with clamp. They can be used in processes of mixing, dissolution, dispersion, and maintenance whenever powerful and high-speed agitation is required in the food processing, cosmetics, pharmaceutical or chemical industries. 
The agitators can be fitted to small tanks of up to 1,500 liters for work with low-viscosity products.

Anmod om information

PBC Flytbar omrører

Funktion

These agitators are fixed to the wall of the tank  by means of a clamp, thanks to the joint, they can be inclined to the required position.
The rotation of the propeller makes the fluid flow to the bottom of the tank and then up to the surface of the fluid along the tank wall opposite to the wall to which the agitator is fitted. This effect is promoted if the bottom of the tank is curved.

Design og karakteristika

Agitator with clamp.
Retainer.
Bearing support.
Propeller attached to shaft and shaft attached to half-shaft by Allen setbolts.
IEC B14 motors, 1500 rpm, IP 55, F-class insulation.
Maximum power 0,75 kW.
Lineflux propeller (Type 18).

Materialer

Parts in contact with the media: AISI 316L
Retainer: NBR
Bearing support: Aluminum
Surface finish: Ra ≤ 0,8 μm (except Lineflux propeller)

Muligheder

Retainer in FPM.
Welded propeller with Ra ≤ 0,5 µm surface finish.
Motor shroud.
Motors with other protections.
Motors: 950 rpm or 750 rpm.
Pneumatic drive.

Dokumenter

Datablad (8)
Instruktionsmanual (3)
Funktion
These agitators are fixed to the wall of the tank  by means of a clamp, thanks to the joint, they can be inclined to the required position.
The rotation of the propeller makes the fluid flow to the bottom of the tank and then up to the surface of the fluid along the tank wall opposite to the wall to which the agitator is fitted. This effect is promoted if the bottom of the tank is curved.
Materialer og tilvalg

Parts in contact with the media: AISI 316L
Retainer: NBR
Bearing support: Aluminum
Surface finish: Ra ≤ 0,8 μm (except Lineflux propeller)

Retainer in FPM.
Welded propeller with Ra ≤ 0,5 µm surface finish.
Motor shroud.
Motors with other protections.
Motors: 950 rpm or 750 rpm.
Pneumatic drive.

Dokumenter
Español - 26.11.2025
Document № FT.PBC.3_ES.pdf
Title Agitador Portátil PBC
File type235.53 KB
    Hent
English - 26.11.2025
Document № FT.PBC.3_EN.pdf
Title Portable Agitator PBC
File type214.01 KB
    Hent
Français - 26.11.2025
Document № FT.PBC.3_FR.pdf
Title Agitateur Portable PBC
File type214.67 KB
    Hent
Italiano - 26.11.2025
Document № FT.PBC.3_IT.pdf
Title Agitatore Portatile PBC
File type209.08 KB
    Hent
Português - 26.11.2025
Document № FT.PBC.3_PT.pdf
Title Agitador Portátil PBC
File type208.61 KB
    Hent
Deutsch - 26.11.2025
Document № FT.PBC.3_DE.pdf
Title Mobiles Rührwerk PBC
File type212.13 KB
    Hent
Русский - 26.11.2025
Document № FT.PBC.3_RU.pdf
Title Переносная Мешалка PBC
File type333.28 KB
    Hent
汉语 - 26.11.2025
Document № FT.PBC.3_CN.pdf
Title 移动式搅拌器 PBC
File type267.72 KB
    Hent
Español - 26.11.2025
Document № 20.004.30.01ES.pdf
Title INSTRUCCIONES DE INSTALACION, SERVICIO Y MANTENIMIENTO AGITADOR PORTATIL PBC
File type1.09 MB
    Hent
English - 26.11.2025
Document № 20.004.30.01EN.pdf
Title INSTALLATION, SERVICE AND MAINTENANCE INSTRUCTIONS PBC PORTABLE AGITATOR
File type1.08 MB
    Hent
Français - 26.11.2025
Document № 20.004.30.01FR.pdf
Title INSTRUCTIONS D’INSTALLATION, DE SERVICE ET DE MAINTENANCE AGITATEUR PORTABLE PBC
File type978.05 KB
    Hent

Beslægtede produkter