BMI Vertical Agitator

The BMI series comprises a range of vertical agitators with direct drive. They can be used in mixing, dissolution, dispersion, and maintenance processes requiring strong agitation at high speeds, as well as in the food processing, cosmetics, and chemical industries, selecting the appropriate finish in each case.

Applicable to tanks with capacities of up to 10,000 litres, usually with low viscosity products.

Anmod om information

Jeg har læst og accepterer persondatapolitik Jeg accepterer at modtage salgsfremmende informationer

Funktion

The agitators are usually installed off-centre to prevent product rotation but can also be installed centred in conjunction with deflector baffles in the tank.

The rotating propeller pushes the product towards the bottom of the tank, where it is diverted generating an upward flow along the tank walls so that the product reaches the surface of liquid. This effect is enhanced if the tank has a rounded base.

Design og karakteristika

Vertical agitator.
Sealing by means of retainer.
Bearing support.
The propeller is fitted and secured to the shaft and the shaft is secured to the half shaft head by means of allen studs; in the case of sawtooth propeller a one-piece shaft is used.
Motor IEC B5, 4 poles, IP55, F-class insulation.
Maximum power 5,5 kW.
Marine propeller (type 10).

Materialer

Parts in contact with the product AISI 316L
Retainer ring NBR
Bearing support Aluminium
Base plate AISI 316L
Surface finish (except sawtooth propeller) Ra ≤ 0,8 μm

Muligheder

Different sealing options.
FPM retainer ring.
Propeller with Ra ≤ 0,5 μm surface finish and welded to the shaft.
Sawtooth propeller (cowler) in AISI 316L.
Motor shroud.
Other motors and protections on request.

Dokumenter

Datablad (7)

Instruktionsmanual (3)

Funktion

Materialer og tilvalg

Parts in contact with the product AISI 316L
Retainer ring NBR
Bearing support Aluminium
Base plate AISI 316L
Surface finish (except sawtooth propeller) Ra ≤ 0,8 μm