Kontakt

Telers, 60

17820 Banyoles, Spain

+34 972 57 52 00

inoxpa@inoxpa.com

NHS Rührwerk

  • Rührwerk NHS

The NHS agitators are vertical agitators with worm gearmotor. They can be used in mixing, dissolution and maintenance processes where a mild to medium mixing is required. This agitator is designed for the food-processing, cosmetic and pharmaceutical industries and it is provided with the most suitable finish for each industry. 
The NHS agitator can be used in tanks of up to 10.000 L with products of medium to high viscosity.

Information

NHS Rührwerk

Funktionsprinzip

The agitators are installed inside the tank either centrally with current deflectors (baffles), or offset so that the position itself prevents the rotation of the mixed product. The rotation of the propeller makes the fluid flow to the bottom and then up to the surface of the product along the walls of the tank. The effect is enhanced if the bottom of the tank is curved.

Aufbau und Kenndaten

Vertical agitator.
Sealing: splash ring and lip seal.
Propeller fixed to the shaft by Allen cap screws.
Worm gear motor with smooth surfaces and food-grade oil:
IEC, IP55, F-class insulation.
Propeller with 4 inclined blades (T11).

Materialien

Parts in contact with the product: AISI 316
Lip seal: NBR
Gear housing: aluminium 
Surface finish: Ra < 0.8 μm

Optionen

FPM lip seal (FDA).
Shaft and propeller lined with plastic material for use with corrosive products. 
Welded propeller with Ra ≤ 0,5 μm surface finish.
Propeller with 2 inclined blades (T6).
Gamma propeller (T16).
High flow propeller (T19).
Geared motor shroud.
Other motor protections available on request.

Dokument

Technisches datenblatt (6)
Bedienungsanleitung (6)
Funktionsprinzip

The agitators are installed inside the tank either centrally with current deflectors (baffles), or offset so that the position itself prevents the rotation of the mixed product. The rotation of the propeller makes the fluid flow to the bottom and then up to the surface of the product along the walls of the tank. The effect is enhanced if the bottom of the tank is curved.

Materialien und Optionen

Parts in contact with the product: AISI 316
Lip seal: NBR
Gear housing: aluminium 
Surface finish: Ra < 0.8 μm

FPM lip seal (FDA).
Shaft and propeller lined with plastic material for use with corrosive products. 
Welded propeller with Ra ≤ 0,5 μm surface finish.
Propeller with 2 inclined blades (T6).
Gamma propeller (T16).
High flow propeller (T19).
Geared motor shroud.
Other motor protections available on request.

Dokument
Español - 26.11.2025
Document № FT.NHS.3_ES.pdf
Title Agitador Vertical NHS
File type233.35 KB
    Download
English - 26.11.2025
Document № FT.NHS.3_EN.pdf
Title Vertical Agitator NHS
File type238.36 KB
    Download
Français - 26.11.2025
Document № FT.NHS.3_FR.pdf
Title Agitateur Vertical NHS
File type238.10 KB
    Download
Italiano - 26.11.2025
Document № FT.NHS.3_IT.pdf
Title Agitatore Verticale NHS
File type239.01 KB
    Download
Русский - 26.11.2025
Document № FT.NHS.3_RU.pdf
Title Вертикальная Мешалка NHS
File type324.24 KB
    Download
汉语 - 26.11.2025
Document № FT.NHS.3_CN.pdf
Title 垂直搅拌器 NHS
File type310.94 KB
    Download
Español - 26.11.2025
Document № 20.050.30.01ES.pdf
Title INSTRUCCIONES DE INSTALACION, SERVICIO Y MANTENIMIENTO AGITADOR VERTICAL NHS
File type1.17 MB
    Download
Español - 26.11.2025
Document № 20.050.30.02ES.pdf
Title INSTRUCCIONES DE INSTALACION, SERVICIO Y MANTENIMIENTO AGITADOR VERTICAL NHS - ANEXO ATEX
File type351.40 KB
    Download
English - 26.11.2025
Document № 20.050.30.01EN.pdf
Title INSTALLATION, SERVICE AND MAINTENANCE INSTRUCTIONS VERTICAL AGITATOR NHS
File type1.07 MB
    Download
English - 26.11.2025
Document № 20.050.30.02EN.pdf
Title INSTALLATION, SERVICE AND MAINTENANCE INSTRUCTIONS NHS VERTICAL AGITATOR - ANNEX ATEX
File type328.15 KB
    Download
Français - 26.11.2025
Document № 20.050.30.01FR.pdf
Title INSTRUCTIONS D’INSTALLATION, DE MISE EN SERVICE ET DE MAINTENANCE AGITATEUR VERTICAL NHS
File type1.05 MB
    Download
Français - 26.11.2025
Document № 20.050.30.02FR.pdf
Title 1 INSTRUCTIONS D’INSTALLATION, DE SERVICE ET D’ENTRETIEN AGITATEUR VERTICAL NHS - ANNEXE ATEX
File type482.54 KB
    Download

Verwandte Produkte