INOXPA S.A.U.
Telers, 60
17820 Banyoles, Spain
Tel. +34 972 57 52 00
Fax +34 972 57 55 02
inoxpa@inoxpa.com
Re-manufacturing of components
Remanufacturing of components comes with significant benefits, as it helps to extend equipment’s useful life. Additionally, remanufacturing returns the used part to its initial characteristics and best possible functionality.
Remanufacturing is also ideal for renewing old models. Installing new options with newer certificates is useful for obtaining an updated version, in accordance with the current regulatory requirements in the food and pharmaceutical industries.
Remanufacturing involves inspecting, repairing, and updating the components, and if necessary, replacing parts that have become worn through use or over time.
The technical support team follows a strict methodology when diagnosing, evaluating, remanufacturing and testing the components.
A specialised diagnosis
INOXPA's remanufacturing of components first involves evaluating each part. At this point, the components are disassembled and analysed precisely and in detail. The customer receives a quote within around 48 hours of completion of this process.
Why re-manufacture?
- Savings compared to buying a new component
- Returns functionality
- Components are 100% tested prior to dispatch
- Components are returned under warranty
The process
- Material condition declaration and acceptance of the diagnostic quote
- Disassembly and evaluation
- Acceptance of the remanufacturing quote
- Inspection and replacement of worn parts
- Remanufacturing of hydraulic parts
- Test bench
The quote incurs a cost of €70, which will be discounted on acceptance or purchase of new equipment. Once the quote is approved after diagnosis, we proceed with the remanufacturing of the component.
If the quote is rejected, the component is returned to the customer disassembled and without being repaired. INOXPA will not bear any expense for return transportation unless specifically requested and included in the quote.
A quote will not be prepared if the equipment is not provided with a material condition declaration (Directive 89/391/EEC).
Advantages
- Remanufactured components come with a 6-month warranty
- Installation of original spare parts
- More options can be added to the component (for new applications)
- The possibility of updating old models (parts with current certificates and accreditations)
- Fixed prices. On receipt of the quote, INOXPA's price will not be subject to any change.
The INOXPA warranty
The remanufacturing process completes with factory testing and the delivery of the component to the customer. The remanufactured component is returned under warranty from INOXPA. Supplied parts are under warranty for one year for manufacturing defects or faulty materials. The repair warranty covers a period of 6 months.
Our sales network is worldwide, with over one hundred distribution points. With the aim of offering solutions that adapt to all our customers' needs, we offer technical support services: replacement of seals and gaskets, technical user training, etc.
Looking for a customised diagnosis for component remanufacturing? Don't hesitate to get in touch with us!
Other news
-
16/02/2021
PROLAC HCP pump: Efficient, hygienic and robust
PROLAC HCP is a close-coupled, compact and highly efficient centrifugal pump with hygienic design, designed in accordance with EHEDG and authorised to carry 3-A symbol
-
01/12/2020
Equipment for vaccine manufacturing
INOXPA, as a manufacturer of equipment for the pharmaceutical industry, offers tailor-made equipment to produce the vaccine
-
02/11/2020
The new quarter turn valves project
To celebrate the manufacture of the 2 000 000th butterfly valve, INOXPA is launching a new and updated quarter turn valve project to market
-
18/06/2020
How to manufacture hand sanitisers
Worldwide demand for hand sanitiser has grown significantly since the outbreak of COVID-19. INOXPA offers a range of skids to manufacture hand sanitisers
-
13/05/2020
INOXPA CIP system: greater control and a more efficient cleaning process
INOXPA offers a wide range of CIP equipment suitable for cleaning processes for all types of installations in the food, cosmetic, and pharmaceutical industries
-
31/03/2020
COVID-19 update
Given the current situation in Spain amid the coronavirus outbreak, we would like to inform you that INOXPA is considered a provider of essential services
-
10/12/2019
LR/LM side entry agitator
LR/LM side entry agitator range is designed for use in low viscosity product mixing and maintenance applications
-
27/11/2019
Pilot plant session: CIP systems
INOXPA Headquarters hosted a training and demo session of the CIP cleaning and product recovery systems held at the pilot plant
-
21/11/2019
Visit to the factory
Students from the University of Girona visited INOXPA Headquarters in Banyoles
-
24/10/2019
Case studies
To share our experiences, we added a special section of Case studies to the website
-
03/10/2019
Video clip: production of solutions at INOXPA
A new video clip has been released: production of Solutions at INOXPA
-
09/09/2019
PIGGING SYSTEM - Highest hygiene and efficiency
The INOXPA PIGGING SYSTEM recovers products that remain in the pipework after each production run, enabling the recovery of up to 98% of leftover product
-
18/07/2019
Agitators: food grade oil
All geared motors of INOXPA agitators use H1 (incidental food contact) food grade oil registered by NSF
-
13/06/2019
Pilot plant session: mixing of solids
On June 11-12, INOXPA hosted a training session on mixing of solids.
-
06/06/2019
Maintenance videos: SLR rotary lobe pump
INOXPA presents the new series of maintenance videos on the SLR rotary lobe pump
-
29/05/2019
Erich Gonçalves, INOXPA project leader in Brazil
On the 15th of May, Erich Gonçalves joined our company as local project leader for Brazil
-
04/04/2019
3-A certified INNOVA seat valves
3-A certificate has been awarded to INNOVA N and INNOVA K seat valves, designed for use in the main processes in the food, dairy, beverage, and pharmaceutical industries
-
21/02/2019
Technical training
On February 19-20, INOXPA headquarters hosted a technical training course for distributors arranged by the international sales department
-
18/12/2018
INOXPA, a consolidated brand in constant evolution
INOXPA’s marketing and communication department works toward the objective of maintaining a coherent image representative of a company in continuous growth
-
14/12/2018
INOXPA announces the acquisition of FLUINOX
INOXPA announces the acquisition of 100% of the Spanish company FLUINOX, headquartered in Valencia
-
08/10/2018
Training for distributors - October 2018
On October 2-4, INOXPA headquarters hosted a training course for the distributors
-
25/09/2018
Trade fairs in 2018
We participate in the most important trade fairs of the industry, where we present our innovations
-
06/08/2018
INOXPA introduces the new BMA magnetic agitator range
INOXPA’s new BMA magnetic agitator range is an innovative and highly hygienic solution
-
18/06/2018
The best are the genuine
INOXPA genuine spare parts are subject to strict quality control, that guarantees the correct performance of all INOXPA products
-
08/06/2018
Pump specialist seminar
INOXPA headquarters hosted an advanced level training course for distributors
-
16/05/2018
Service and maintenance videos
INOXPA is developing a new type of videos: service and maintenance
-
11/05/2018
Virtual tour 360º
360º tour allows you to virtually visit the Pilot plant and other INOXPA head office facilities
-
22/02/2018
Training for distributors
Training courses for distributors form part of INOXPA’s ongoing personalised customer care and assistance program
-
15/02/2018
PROLAC HCP and SLR pumps obtained the 3-A sanitary certificate
PROLAC HCP and SLR pumps obtained the 3-A sanitary certificate
-
01/12/2017
Pilot plant session: sauces
A demo session oriented to manufacturers of sauces was held at the pilot plant
-
07/08/2017
New logistics centre in Russia
STARINOX has recently finished the construction of its logistic centre on the outskirts of Moscow
-
21/07/2017
New INOXPA website goes live
The new INOXPA Group website has gone live with updated graphics and contents
-
27/06/2017
Pilot plant session
A demo session oriented to manufacturers of gels, shampoos and detergents was held at the pilot plant
-
30/05/2017
INNOVA, the new valve family
Discover the new family of pneumatically actuated single and double seat valves for hygienic applications
-
29/03/2017
Pumps with new surface finish
INOXPA announces the launch of the pumps with the new matt finish
-
07/02/2017
INOXPA enters the INTERPUMP GROUP
INOXPA is now part of the Interpump Group
-
09/01/2017
IE3 motors
The third stage of Regulation (EC) nº 640/2009 with regard to ecodesign requirements comes into effect
-
07/12/2016
INOXPA Solutions Srl Moldova
The objective is to have an engineering company capable of developing projects and solutions for the countries of
-
28/11/2016
Damià López, new General Manager
The Board of Directors of INOXPA GROUP wishes to inform you that Mr. Damià López has been appointed General Manager
-
22/11/2016
Sales meeting 2016
INOXPA Headquarters in Banyoles hosted the Sales Meeting 2016
-
25/05/2016
INOXPA community
The idea is to keep on sharing with you our projects and activities via the social media channels
-
12/05/2016
New INOXPA pilot plant is open for trials
The Pilot plant is open for production trials and our customers are invited to carry out all the necessary tests
-
29/04/2016
Thank you
Thank you all for the support we have received
-
21/03/2016
Animation: rotary lobe pumps
The new animation is on the range of the rotary lobe pumps: SLR, SLR-T, HLR and TLS
-
17/02/2016
DIN unions and fittings
INOXPA production processes are subject to the highest requirements
-
19/01/2016
Manifold of valves
This new INOXPA video shows how a cluster of seat valves works
-
12/01/2016
OPTIBLANC 2015
Consortium Project with the technological centre VITEC and the GRAMONA and CASTELO DE MEDINA wineries
-
28/09/2015
Catalogue of dimensions
The new catalogue of dimensions is now available
-
31/08/2015
Stainless steel multiposition handle
New stainless steel multiposition handle for butterfly valves
-
17/06/2015
Side channel pump ASPIR
Upgrade of the design of the self-priming side channel pump ASPIR
-
28/11/2014
CEPYME awards
INOXPA is named “SME OF THE YEAR” by CEPYME
-
17/11/2014
Dairy solutions at your fingertips
INOXPA offers its modular system that enables the development of plants with modular skids
-
30/10/2014
High performance centrifugal pump
It is the ideal solution for transferring liquids with high concentrations of suspended solids
-
15/10/2014
Sales meeting
INOXPA is hosting a Sales Meeting this week
-
02/10/2014
Yoghurt production
INOXPA created a video of the yogurt production process
-
19/09/2014
ENTHALPY
The European project aims to reduce energy consumed for the production of powdered milk by 60%
-
24/07/2014
New blender
INOXPA has designed a blender with a counter rotating agitator MCR
-
18/06/2014
Award for Innovation and Design
INOXPA receives "2013 National Award for Innovation and Design"
-
15/05/2014
C-TOP+ with AS-interface
The control unit is available for the entire range of valves supplied with C-TOP+ units
-
23/04/2014
ESTAMPINOX EFI: design upgrades
Upgraded design of the Estampinox EFI centrifugal pump
-
03/02/2014
Improved Solutions Portugal
The production plant is equipped with modern machinery
-
04/12/2013
Downloads
We have redesigned a very important section of the website: downloads
-
28/11/2013
New business opportunities
Inoxrus has achieved a good penetration of the INOXPA brand
-
19/11/2013
PROLAC HCP-WFI
Centrifugal pumps for pharmaceutical applications
-
21/10/2013
New PROLAC HCP SP
INOXPA announces the launch of the new range of centrifugal pumps
-
25/06/2013
Seminar in Germany
INOXPA took part in a technical seminar in Germany
-
05/06/2013
News sales office in Colombia
INOXPA COLOMBIA SAS is a young team of 12 professionals
-
20/05/2013
New sales office in the UAE
NOXPA Middle East will cover the Middle East countries
-
16/01/2013
Demonstration of skids
INOXPA and Parcitank SA arranged a technical workshop
-
25/10/2012
Blenders for solids
NOXPA has designed two blenders for solids: double cone blender and “V”-type blender
-
31/07/2012
New Prolac HCP
INOXPA announces the launch of the new range of centrifugal pumps PROLAC HCP
