The ME-4100 series of the inline high shear mixers offers a possibility to pump, disperse, homogenize and emulsify products with one and the same equipment.
Numerous chemical, food-processing, pharmaceutical and cosmetics production processes require this system as there are lines with ingredient separation or due to the lack of space inside the tanks to install vertical or bottom of the tank mixers.
These mixers are especially useful in already existing plants.
They can work with a recirculation tank reaching the best efficiency after several passes of the product through the mixer.
ME-4100 In-line Mixer
Request information
ME-4100 In-line Mixer
Operating principle
The casing is similar to a casing of a centrifugal pump, it houses the stator and the rotor. It is characterised by a high shear due to an adjusted tolerance between the rotor and the stator and the high speed of the rotor.
The product is suctioned through the inlet and the rotor pushes it to the stator. Passing through the slots of the stator the product is mechanically sheared, the particles are sheared by the rotor at the speed of more than 20 m/s.
And finally the flow is hydraulically sheared leaving the stator through the slots at a high speed.
If the viscosity of the product is higher than 200cP, it is recommended to put an auxiliary pump at the inlet of the mixer, and if a high discharge pressure is required, it is necessary to assemble another auxiliary pump.
Design and features
High shear, particle size reduction to less than 100 microns.
Sanitary single mechanical seal.
Slotted head (standard).
Various easily interchangeable working heads.
Completely CIPable design.
Drain port connection (in the casing): clamp DN-3/4".
Standard connections: Clamp ISO-2852.
Close-coupled construction, small baseplate.
Motor shroud.
Motors: IEC B35, IP 55, F-class insulation.
Materials
Parts in contact with the product: AISI 316L
Other stainless steel parts: AISI 304
Mechanical seal: C / SiC / EPDM
Gaskets: EPDM
Surface finish electropolish: Ra ≤ 0.8µm
Options
Disintegration head.
Fine screen head.
Cooled or pressurised mechanical seal.
Connections: DIN 11851, SMS, flanges...
Baseplate with antivibration legs.
Trolley with/without control panel.
Mirror polish Ra<0.5µm for the pharmaceutical applications.
Other motor protections.
Model ME-4130: possibility of a bare shaft construction.
Documents
Data sheet (8)
Instruction manual (7)
Operating principle
The casing is similar to a casing of a centrifugal pump, it houses the stator and the rotor. It is characterised by a high shear due to an adjusted tolerance between the rotor and the stator and the high speed of the rotor.
The product is suctioned through the inlet and the rotor pushes it to the stator. Passing through the slots of the stator the product is mechanically sheared, the particles are sheared by the rotor at the speed of more than 20 m/s.
And finally the flow is hydraulically sheared leaving the stator through the slots at a high speed.
If the viscosity of the product is higher than 200cP, it is recommended to put an auxiliary pump at the inlet of the mixer, and if a high discharge pressure is required, it is necessary to assemble another auxiliary pump.
Materials and options
Parts in contact with the product: AISI 316L
Other stainless steel parts: AISI 304
Mechanical seal: C / SiC / EPDM
Gaskets: EPDM
Surface finish electropolish: Ra ≤ 0.8µm
Disintegration head.
Fine screen head.
Cooled or pressurised mechanical seal.
Connections: DIN 11851, SMS, flanges...
Baseplate with antivibration legs.
Trolley with/without control panel.
Mirror polish Ra<0.5µm for the pharmaceutical applications.
Other motor protections.
Model ME-4130: possibility of a bare shaft construction.
Documents
| Document № | FT.ME4100.2_ES.pdf |
| Title | Mixer en línea ME 4100 |
| File type | Español - 11/26/2025364.28 KB |
|
|
| Document № | FT.ME4100.2_EN.pdf |
| Title | Inline mixer ME 4100 |
| File type | English - 11/26/2025364.36 KB |
|
|
| Document № | FT.ME4100.2_FR.pdf |
| Title | Mixer en ligne ME 4100 |
| File type | Français - 11/26/2025370.40 KB |
|
|
| Document № | FT.ME 4100.2_IT.pdf |
| Title | Mixer en linea ME 4100 |
| File type | Italiano - 11/26/2025368.21 KB |
|
|
| Document № | FT.ME4100.2_PT.pdf |
| Title | Misturadora em linha ME-4100 |
| File type | Português - 11/26/2025593.95 KB |
|
|
| Document № | FT.ME4100.2_DE.pdf |
| Title | Inline-Mischer ME 4100 |
| File type | Deutsch - 11/26/2025365.61 KB |
|
|
| Document № | FT.ME4100.2_RU.pdf |
| Title | Миксер inline ME 4100 |
| File type | Русский - 11/26/2025498.55 KB |
|
|
| Document № | FT.ME4100.2_CN.pdf |
| Title | 管道混合器 ME 4100 |
| File type | 汉语 - 11/26/2025382.88 KB |
|
|
| Document № | 03.400.30.00ES.pdf |
| Title | INSTRUCCIONES DE INSTALACIÓN, SERVICIO Y MANTENIMIENTO MIXER IN-LINE SERIE 4100 |
| File type | Español - 11/26/20252.41 MB |
|
|
| Document № | 03.400.30.01ES.pdf |
| Title | INSTRUCCIONES DE INSTALACIÓN, SERVICIO Y MANTENIMIENTO MIXER IN-LINE SERIE 4100 - ANEXO ATEX |
| File type | Español - 11/26/2025410.39 KB |
|
|
| Document № | 03.400.30.00EN.pdf |
| Title | INSTALLATION, SERVICE AND MAINTENANCE INSTRUCTIONS IN-LINE MIXER 4100 SERIES |
| File type | English - 11/26/20252.70 MB |
|
|
| Document № | 03.400.30.01EN.pdf |
| Title | INSTALLATION, SERVICE AND MAINTENANCE INSTRUCTIONS IN-LINE MIXER 4100 SERIES - ANNEX ATEX |
| File type | English - 11/26/2025985.73 KB |
|
|
| Document № | 03.400.30.00FR.pdf |
| Title | INSTRUCTIONS D’INSTALLATION, DE SERVICE ET D’ENTRETIEN MIXEUR EN LIGNE SÉRIE 4100 |
| File type | Français - 11/26/20252.62 MB |
|
|
| Document № | 03.400.30.01FR.pdf |
| Title | INSTRUCTIONS D’INSTALLATION, DE SERVICE ET D’ENTRETIEN MIXEUR EN LIGNE SÉRIE 4100 - ANNEXE ATEX |
| File type | Français - 11/26/2025453.09 KB |
|
|
| Document № | 03.400.30.00RU.pdf |
| Title | ИНСТРУКЦИИ ПО УСТАНОВКЕ, ЭКСПЛУАТАЦИИ И ТЕХНИЧЕСКОМУ ОБСЛУЖИВАНИЮ МИКСЕР МЕ-4100 |
| File type | Русский - 11/26/20252.89 MB |
|
|
Related products
-
ME-1100
Vertical Mixer
The ME-1100 series of the high shear vertical mixers present a solution for the processes of dispersion, emuls...
-
ME-6100
Tank Bottom Mixer
The ME-6100 series of the high shear bottom of the tank mixers present a highly hygienic solution for the proc...
-
8100X
Multitooth Mixer
The 8100X series multitooth mixers are employed in the applications requiring high shear for achieving a thoro...
